DIAL INDICATOR 
SERIES 2 - Standard Type, Graduation 0.001mm 
 
 • Dial indicators with the standard graduation of 0.001mm have a ring with an outer diameter of ø57mm. 
 All types come with limit indicators and ring clamp. 
 • The ring clamp and lifting lever (optional) can be placed 
 either from the left or the right side. These parts can be installed and removed without 
 tools 
 • The adhesion between the ring and the crystal, as well as the use of an O-ring, prevents the entry of water and oil from the front. 
 • The spindle rod is made of high strength hardened stainless steel that is resistant to extreme use. 
 • Use a carbide contact tip. 
 • The large gear is made of wear and deformation resistant stainless steel. 
 • Bearing parts use jeweled bearings, providing excellent 
 indication sensitivity and durability. 
 • The application of a hard coating on the glass surface makes the indicator highly resistant to scratches and chemicals. 
 
 SPECS: 
 Brand - Mitutoyo 
 Code No. 2109SB-10 
 With flat lid 
 Graduation - 0.001mm 
 Interval (interval / rev) - 1mm (0.2mm) 
 Error of indication; 
 Total - 5μm 
 Recoil - 2μm 
 1/10 Rev - 2μm 
 1 Rev - 4μm 
 Repeatability - 0.5μm